เป็นการอัพเดท /usr/local/etc/no-ip2.conf
#=============================#
stop: /etc/init.d/noip2 stop
Shutting down noip2: noip2 killproc -TERM /usr/local/bin/noip2
restart: sudo /etc/init.d/noip2 restart
http://www.itmission.org/Main/NOIP
########################################################################### HOW TO USE THE CLIENT WITHOUT READING THE REST OF THIS TEXT Usual operation? /usr/local/bin/noip2 -C configure a client /usr/local/bin/noip2 run a client /usr/local/bin/noip2 -S display info about running clients /usr/local/bin/noip2 -D pid toggle the debug state for client pid /usr/local/bin/noip2 -K pid terminate client pid Have more than one internet access device? /usr/local/bin/noip2 -M -c file start additional instances ###################################################################### ==>>>
jhcis@jhcis-srv:~$ sudo su [sudo] password for jhcis: root@jhcis-srv:/home/jhcis# /usr/local/bin/noip2 -S 1 noip2 process active. Process 1368, started as noip2, (version 2.1.9) Using configuration from /var/lib/noip2/noip2.conf Last IP Address set 0.0.0.0 Account pongpol07@gmail.com configured for: host pcu-nonghouchang.no-ip.biz Address check every 5 minutes, directly connected via /dev/Eth0. Configuration data from /usr/local/etc/no-ip2.conf. Account pongpol07@gmail.com configured for: host thph-nonghouchang.ddns.net Updating every 5 minutes via /dev/Eth0 with NAT enabled. root@jhcis-srv:/home/jhcis#
#######################################################################
USAGE: noip2 [ -C [ -F][ -Y][ -U #min]][ -c file]
[ -d][ -D pid][ -i addr][ -S][ -M][ -h]
Version Linux-2.x.x
Options: -C create configuration data
-F force NAT off
-Y select all hosts/groups
-U minutes set update interval
-c config_file use alternate data path
-d increase debug verbosity
-D processID toggle debug flag for PID
-i IPaddress use supplied address
-I interface use supplied interface
-S show configuration data
-M permit multiple instances
-K processID terminate instance PID
-h help (this text)
#################################################################
echo "Stopping No-IP"
killall noip2
USAGE: noip2 [ -C [ -F][ -Y][ -U #min]][ -c file]
[ -d][ -D pid][ -i addr][ -S][ -M][ -h]
Version Linux-2.x.x
Options: -C create configuration data
-F force NAT off
-Y select all hosts/groups
-U minutes set update interval
-c config_file use alternate data path
-d increase debug verbosity
-D processID toggle debug flag for PID
-i IPaddress use supplied address
-I interface use supplied interface
-S show configuration data
-M permit multiple instances
-K processID terminate instance PID
-h help (this text)
#################################################################
echo "Stopping No-IP"
killall noip2
