noip2

/usr/local/bin/noip2 -i eth0 -M
เป็นการอัพเดท /usr/local/etc/no-ip2.conf
#=============================#
stop: /etc/init.d/noip2 stop
Shutting down noip2: noip2 killproc -TERM /usr/local/bin/noip2
restart:  sudo /etc/init.d/noip2 restart

http://www.itmission.org/Main/NOIP

###########################################################################
HOW TO USE THE CLIENT WITHOUT READING THE REST OF THIS TEXT

Usual operation?
/usr/local/bin/noip2 -C   configure a client
/usr/local/bin/noip2   run a client
/usr/local/bin/noip2 -S   display info about running clients
/usr/local/bin/noip2 -D pid  toggle the debug state for client pid
/usr/local/bin/noip2 -K pid  terminate client pid

Have more than one internet access device? 
/usr/local/bin/noip2 -M -c file  start additional instances

###################################################################### ==>>>

jhcis@jhcis-srv:~$ sudo su
[sudo] password for jhcis: 
root@jhcis-srv:/home/jhcis# /usr/local/bin/noip2 -S
1 noip2 process active.

Process 1368, started as noip2, (version 2.1.9)
Using configuration from /var/lib/noip2/noip2.conf
Last IP Address set 0.0.0.0
Account pongpol07@gmail.com
configured for:
 host  pcu-nonghouchang.no-ip.biz
Address check every 5 minutes, directly connected via /dev/Eth0.

Configuration data from /usr/local/etc/no-ip2.conf.
Account pongpol07@gmail.com
configured for:
 host  thph-nonghouchang.ddns.net
Updating every 5 minutes via /dev/Eth0 with NAT enabled.
root@jhcis-srv:/home/jhcis# 

#######################################################################
USAGE: noip2 [ -C [ -F][ -Y][ -U #min]][ -c file]
        [ -d][ -D pid][ -i addr][ -S][ -M][ -h]

Version Linux-2.x.x
Options: -C               create configuration data
         -F               force NAT off
         -Y               select all hosts/groups
         -U minutes       set update interval
         -c config_file   use alternate data path
         -d               increase debug verbosity
         -D processID     toggle debug flag for PID
         -i IPaddress     use supplied address
         -I interface     use supplied interface
         -S               show configuration data
         -M               permit multiple instances
         -K processID     terminate instance PID
         -h               help (this text)
#################################################################
echo "Stopping No-IP"

killall noip2

teamviewer cannot start

sudo /opt/teamviewer9/tv_bin/teamviewerd start

Removing XAMPP from Ubuntu

Removing XAMPP from Ubuntu is simple. Follow the following steps:

1. XAMPP gets itself installed in “opt/lampp” directory by default.
2. Stop the XAMPP server by typing sudo /opt/lampp/lampp stop in the Terminal (you can open the terminal by pressing Ctrl+Alt+t).
3. Now type sudo rm -rf /opt/lampp4. Check your opt directory. The folder “lampp” would have been removed.
5. You have successfully removed XAMPP from your Ubuntu.

วิธีแก้ปัญหา Error 0×80070522: A required privilege is not held by the client

บทความนี้คัดลอกมาจาก http://www.ilovebrowser.com/วิธีแก้ปัญหา-error-0x80070522-a-required-privilege-is-not-held-by-the-client/

แก้ด้วย Local Security Policy(secpol) ทำได้ ดังนี้

• อันดับแรก ให้ไปที่ ให้ไปที่ Start > แล้วพิมพ์คำว่า “secpol.msc”(ไม่ต้องมี “”) จากนั้นจะปรากฏดังรูป
  
  ให้คลิกที่ secpol.msc
• อันดับต่อมา จะปรากฏหน้าต่าง Local Security Policy ให้คลิกไปที่ Local Policies->Security Options
  แล้วดับเบิ้ลคลิกที่ “User Account Control: Run all administrators in Admin Approval Mode” เพื่อเปลี่ยนค่าเป็น Disable ดังรูป
  
• อันดับสุดท้าย ให้กดปุ่ม OK และปิดหน้าต่าง Local Security Policy ออกไป จากนั้นให้รีสตาร์ทเครื่อง 

sqlyog_ultimate_reg.reg(11.3.3-0)

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Software\{906D6D9F-AB51-429F-8816-8D33284204FF}]
"InE"=hex:c6,c6,c4,cc,c6,62,66,ca,5a,c6,66,62,c8,5a,68,64,c6,ca,5a,70,72,66,72,\
  5a,66,c6,6e,ca,6c,66,ca,c8,6a,68,62,6e
"x64"=dword:00000001
"InU"=hex:65,64,64,64,39,64,36,37,2d,30,34,37,39,2d,34,37,61,37,2d,38,36,31,35,\
  2d,63,34,39,33,34,61,32,36,65,38,37,66
"Name"=hex:8c,ea,d8,d8,ac,ca,e4,e6,d2,de,dc
"x86"=dword:00000001

เป็นงง ในเว็บเขาบอก jdkhome="C:\\Program Files\\Java\\jre7"

# ${HOME} will be replaced by user home directory according to platform
default_userdir="C:\Users\polngpole\AppData\Roaming\.ireport\5.5.0"
default_mac_userdir="${HOME}/Library/Application Support/${APPNAME}/5.5.0"

# options used by the launcher by default, can be overridden by explicit
# command line switches
default_options="--branding ireport -J-Xms256m -J-Xmx512m -J-Dorg.netbeans.ProxyClassLoader.level=1000 -J-XX:MaxPermSize=512m -J-Dapple.laf.useScreenMenuBar=true -J-Dapple.awt.graphics.UseQuartz=true "
# for development purposes you may wish to append: -J-Dnetbeans.logger.console=true -J-ea

# default location of JDK/JRE, can be overridden by using --jdkhome
switch
jdkhome="jdkhome="C:\Program Files\Java\jdk1.7.0_80"

# clusters' paths separated by path.separator (semicolon on Windows, colon on Unices)
#extra_clusters=

ยังแก้ไม่ได้ในบล็อก ในเว็บใช้แบบนี้ได้

/* แบบ advance
function execInBackground($cmd) {
    if (substr(php_uname(), 0, 7) == "Windows"){
        pclose(popen("start /B ". $cmd, "r"));
    }
    else {
        exec($cmd . " > /dev/null &");  
    }
}
execInBackground($command);

แบบนี้เบสิค ก็ใช้ได้ครับ
$command = "B:\\Users\Public\\Documents\\2.docx";
exec($command);
*/

exec("B:/Users/Public/Documents/2.docx");

?>